Bogen Sm4t Easy Install Ceiling Speaker Bogen Sm4t Easy Install Ceiling Speaker
Bogen Sm4t Easy Install Ceiling Speaker
Call us: 847-478-1450


    Follow us on :  Twister on Facebook Twister on Twitter Twister Blog Twister on LinkedIn Twister on Stumble Upon

  SKU# SM4T J00054


Stock   72 item(s) available  
Opened non-defective items are not returnable.

Cannot be shipped to Canada, APO/FPO, PO Box and USA protectorates.
Manufacturer: BOGEN     

Mfg Part#: SM4T.    Weight: 4 lbs

This product is BRAND NEW.


The Bogen SM4T Easy Install® Speakers are surface-mount speakers, designed to typically install in less than a minute. Installation is a simple, three-step process that does not require tools. First, two specially-designed studs pierce the ceiling tile. Second, two custom-designed wing nuts secure the speaker to the ceiling. Third, standard wire nuts make the electrical connection directly to the color-coded studs. Both the SM1EZ and SM4T are lightweight, durable speakers with a low-profile contemporary design, making them versatile enough to be installed in just about any installation with standard ceiling tiles. The SM1EZ is a 1-watt single-tap speaker. The SM4T is a 4-watt multi-tap speaker with a rotary switch that eliminates transformer tap wires. Both models have an exterior volume control for easy balancing that is easily accessible, but doesn´t attract tampering.
o Installs in less than a minute
o Compatible with both 70V and 25V systems
o High intelligibility and efficiency
o Direct and reflected sound paths create wide dispersion angle
o Lightweight and durable plastic shell with an off-white, paintable finish
o Simple, three-step installation process
o No tool(s) installation
o Color-coded mounting studs identify polarity to make the electrical connection easier (no external wires)
o High-quality, wire-wound volume control on outside of speaker for easy access
o Can be installed in any drop ceiling with standard ceiling tiles
o Surface-mounting design eliminates need to cut ceiling tile, no mess installation
o Contemporary design blends/matches any decor
o SM1EZ has a single, 1-watt tap
o SM4T has switch-selectable multiple taps for controlling output level (taps - 4, 2, 1, 1/2, 1/4 watts)
o O-ring seal holds speaker tight to ceiling surface, eliminating whistling and ensures smoother sound without peaks
o Textured studs easily pierce ceiling tile and secure wire nut connections
o Wide-bottom, easy-to-handle mounting wing nuts provide secure speaker mounting
o Tile Bridge available (Model SMTB, sold separately)
o All necessary mounting hardware included
o Complies with NFPA National Code 160b and UL-2043 (Report available)

Architect& Engineer Specifications
The speaker shall be a Bogen Model _____ (specify SM1EZ or SM4T). The frequency response shall be 125 Hz to 15 kHz. Dispersion angle shall be no less than 120°. Sensitivity, measured 1-watt @ 1 meter on axis, shall be a minimum of 90 dBspl. The speaker shall comply with NFPA National Code 160b that allows speakers to be installed in plenums and other air handling spaces. The speaker shall also comply with UL-2043 (report available). The speaker shall be of durable ABS plastic construction and shall be mounted using specially designed studs that easily pierce ceiling tiles. Custom-designed wing nuts shall be used for securing the speaker to the ceiling tile, as well as two standard wire nuts to connect the speaker wires to the studs. One stud shall be copper-plated and the other nickel-plated as a means of designating polarity. The speaker shall include a large, rubber O-ring seal to hold the base of the speaker cavity tight to the ceiling tile. A Tile Bridge Support accessory (Model SMTB) shall be available for distributing the weight in suspended ceilings. The unit shall measure 9-1/2" in diameter by 3" in depth. Base diameter against ceiling shall be 8-3/4". Product weight shall be 2 lb. Use for SM1EZ.The unit shall incorporate a 1-watt single-tap with wire-wound volume control for use in 25V/70V constant voltage speaker systems. Use for SM4T. The unit shall incorporate a rotary switch to select power settings of 4, 2, 1, 1/2, and 1/4 watts with wire-wound volume control for use in 25V/70V constant voltage speaker systems. The speaker´s settings are to be rotary-switch selectable. 25V/70V selectable with jumper on PCB.
  • Bogen SM4T Easy Install Speaker.
  • 4 Watt Multi-Tap Speaker.
  • Settings: 4, 2, 1, 1/2, and 1/4 Watts.
  • No-Tool Installation.

Product Reviews


Customer voting


Add your review here

Your name:

Your message:


Customer Help

Site Information

Read Store Reviews Read Store Reviews Premier Store Read Store Reviews

Recover password
Contact us
Privacy statement
Terms & Conditions
Site Map
Accepted payment methods

Trusted Commerce
Official PayPal Seal
Verified Merchant Seal
Certified store
Order ID

Billing phone

Return Policy
Request RMA
    Copyright © 2002-16 The Twister Group.