Navpilot 711c Outboard Autopilot System, MFG# NAVPILOT 711C/OB, 4" color display, 4.3"W x 4.3"H control head, 12/24 VDC, rotary control knob. System includes control head, processor, and rate compass. Hydraulic pumpset sold separately.
Compact Display Autopilot for Inboard Power Boats and Sailboats
FURUNOs NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile. The new NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down. From the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate.
Furuno's all-new "Fantum Feedback" NavPilot software clears the path to a simplified installation, while also delivering enhanced steering control. With Fantum Feedback, NavPilot outboard installations no longer require use of a physical rudder feedback unit. This streamlined installation, combined with Furuno's unique adaptive learning Autopilot technology, provides unmatched outboard Autopilot performance. Fantum Feedback is a menu-selectable feature available in the latest NavPilot 700 series software. This software was developed and extensively tested on a wide variety of outboard vessels with hydraulic steering and reversing pump control. Fantum Feedback achieves precise course control, from slow trolling speeds to over 60 knots, utilizing a newly developed, time-based rudder gain process, rather than traditional rudder angle based control.
The optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot.
The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy. SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset.
FishHunter mode is a unique feature of FURUNOs NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).
Furuno's new NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The Plug and Play CAN bus interface allows for easy installation and exceptional interface ability.
- Selectable "Economy" and "Precision" Navigation Modes combine adaptive technology providing fuel and power savings of up to 2.5% or more.
- "Precision" XTE accuracy: within 18 ft.
- Dual NMEA2000 network interface and Furuno CAN bus interface provides isolation and redundancy for safety
- Simplified activation set-up by on-screen wizard
- Simple one-touch mode selection enables flexible steering and course control
- Perfect cosmetic match with NavNet Tztouch
- Mix and match up to 6 displays in a single network
In the Box:
- NAVpilot 711c Control Head w/ 15 meter cable
- Proccessor Unit
- PG700 Heading Sensor w/ 6 meter cable
- Installation hardware
- Owner's manual
|Display2||4" diag. color LCD|
|Control Type||Rotary knob and pushbuttons|
|Processor||FAP7002: 12 or 24 VDC, 50 Amp max.|
|Rudder Feedback||Uses Fantum Feedback|
|Compass||PG700 Fluxgate w/ rate gyro|
|Drive Unit||Sold separately|
|Remote Options||Up to 6 FAP700/711/720 control heads and/or remotes|
|Interface||2 ea. NMEA 0183 in/out, NMEA 2000|
|Dimensions||Control head: 4.3"W x 4.5"H x 3.9"D; Wt: .75 lb. Processor: 10"W x 10.2"H x 3.5"D; Wt: 4.2 lbs.|