DRS6A, MFG# DRS6A, NavNet 3D digital UHD Radar, 6kW, 64nm, 4' open array. Ultra High Definition offers crystal clear, noise free target presentation. PSU012 required for use w/MFD8. Includes gearbox, XN12A/4 4' open array and 15m radar signal cable.
The DRS6A Incorporates a 64 nm., 6KW T/R and 4' Open Array Antenna
Furuno has taken its NMEA award-winning radar technology to the next level with Ultra High Definition Digital Radar. UHD offers crystal clear, noise-free target presentation with automatic real-time digital signal processing. Antenna rotation speed (24/36/48 rpm) is automatically shifted to the appropriate pulse length. Commercial-grade radar performance is now available in the ultimate MFD navigation suite.
Simultaneous scanning technology drives our powerful dual-range radar, providing unsurpassed target detection. With each sweep of antenna, dual progressive scan transmissions are sent, received and processed to display two simultaneous and separate radar ranges on your NavNet 3D display. Each radar presentation acts autonomously, allowing for manipulation of individual gain and clutter controls.
The DRS6A pedestal incorporates a Network port to which certain Furuno network sensors, including the WS200 Wind Sensor, SC30 Satellite Compass, and GP330B GPS receiver, can be directly connected. Power for these networked sensors is supplied directly from the radome itself, allowing for flexible installation of multiple sensors without the need to run cables all the way to the main processor unit.
Additional Components (sold separately):
- PSU012 power supply required if used with MFD8
In the Box:
- 6KW Radar Pedestal
- XN12A 4' open array antenna w/ hardware (boxed separately)
- Interconnect cable (15 m) (boxed separately)
- Installation hardware
- Installation manual
|Input Voltage||Supplied from display/processor on MFD12 & MFDBB units, MFD8 requires PSU-012 power supply (sold separately)|
|Antenna||4' open array|
|Power||6KW; 64 nm.|
|Interface||Ethernet; NMEA 2000 connector for external sensors.|
|Other Functions||Variable antenna rotation speed (24/36/48 rpm)|
|Dimensions||Pedestal: 17.5"H (w/ antenna) x 13.4"W x 17.2"D; Wt: 55.1 lbs. Power Supply: 12.4"W x 3.9"H x 9.9"D; Wt: 4 lbs.|