REMAN MS2012 Inverter/charger, MFG# MS2012, 2000 Watt true sinewave output, 12V/100 Amp Charger, hardwired A/C connections with transfer relay, LED power indicator, optional remote. Factory Refrubished.
Factory Refurbished Unit
Install the MS Series in four easy steps: simply connect the inverter’s output to your distribution circuits or electrical panel, connect your shore power cable (AC) to the inverter’s easy-to-reach terminal block, connect the batteries, and switch on the power.
The Pure sine wave output powers your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Our Power Factor Corrected (PFC) charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger – using only 15 amps per 100 amps versus 23 amps used by standard chargers.
Mount the MS Series on a shelf, bulkhead, or even upside down. The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator, is backed by a three-year (36-month) limited warranty, and has a remote control option for convenient finger-tip operation, including the new "one-knob" programming.
Optional AGS module automatically starts and stops your generator based on temperature or battery voltage.
|Display2||LED power indicator|
|Battery||Flooded or Gel|
|Output Voltage||100 Amps, 12 VDC|
|Power||2,000 Watts; 115 V; 60 Hz; true sine wave|
|Remote Options||Optional remote control|
|Dimensions||13.75 x 12.65 x 8.0; Wt: 42 lbs.|
In the Box:
- MS2000 Inverter/Charger
- Battery temperature sensor w/ 15' cable
- Installation hardware
- Owner's manual