Rule-Mate® 500AAll-in-one pump & switch - No float switch required
Fully Automated Bilge Pump
The NEW eco-friendly Rule Mate series of Bilge pumps feature a solid state water sensing technology that eliminates the need for a separate float switch.
When water enters the bilge and reaches a certain height (2-3/4 inches) a sensor turns the pump on. After the water is pumped out, another sensor shuts the pump off.
The sensor's unique ”field effect” technology is programmed to recognize the dielectric constant of water only. In the event of an onboard oil spill, straight motor oil that enters the bilge will not turn the pump on. It's part of Rule's continuing commitment to preserving our waterway.
Pump turns on when water level rises & shuts off when water is removed
Will not pump oil - Straight motor oil will not turn pump on
Snap-off strainer for easy cleaning
Limited three year warranty
Voltage: 12 Vdc
Amp Draw: 2.0 amp
Fuse Size: 3 amp
Height: 4.5 inches
Width: 6 Inches
Gallons Per Hour = 500Operation = AutomaticOutlet Size = 3/4”Power - Max Continuous (Amps) = 2 ampsVolts = 12vGallons Per Minute = NONE