Wall surface mounted speaker assembly complete with speaker, amplifier, built-in volume control, sloped baffle and mounting bracket.
UTILIZES STANDARD CAT 3, 5, OR 6 CABLE
EXCELLENT VOICE AND MUSIC REPRODUCTION
EXTERNALLY ACCESSIBLE VOLUME CONTROL
WIDE SOUND DISPERSION
ELECTRICALLY, ACOUSTICALLY MATCHED PARTS
ATTRACTIVE WHITE OR BLACK FINISH
Cone Diameter: 8.0" (20.32 cm)
80 Hz to 15 kHz
Impedance: > 600 Ohms nominal
Signal Level: -10 dBm line level
Rating: > 96 dB @ 4' (1.22 m)
Signal/noise ratio: -70 dB
50 mA @ -24 Vdc
Temperature: -4 to +131 °F (-20 to +55°C)
Humidity: 0-95% Non-Condensing
HOUSING AND FINISH
Baffle constructed of .5" (1.27 cm) particle
board, covered with white or black vinyl with
matching cloth grille.
DIMENSIONS AND WEIGHT
9.6" (24.38 cm) H x 11.5" (29.21 cm) W x 4.2"
(10.67 cm) D
Weight: 4.5 lbs (2.04 kg)
ARCHITECTS´ AND ENGINEERS´ SPECIFICATIONS
MODEL V-1016-W, V-1016-BK
WALL MOUNTED ONE-WAY SPEAKER
The Wall Speaker, Model V-1016-W, V-1016-BK shall consist of a 45 ohm speaker, amplifier with > 600 ohm input
impedance, volume control, and sloped baffle. The speaker, housing and hardware shall be electrically and acoustically
matched for a frequency response of 80 Hz to 10kHz.
The speaker element shall be cone type with 5 oz (142 g) ceramic magnet. Diameter of speaker cone shall be 8.0"
(20.32 cm). Voice coil diameter shall be .75" (1.91 cm). Voice coil impedance shall be 45 ohm.
The amplifier shall have a frequency response of 80 Hz to 15 kHz. Amplifier audio input impedance shall be > 600
ohm. Amplifier audio input shall be -10 dBM line level. Distortion shall be less than 1.5% at rated output of 1 watt RMS.
Signal to noise ratio shall be -70 dB. The amplifier shall operate on a -24 Vdc nominal, positive ground power supply.
Operating current shall be 50 mA at -24 Vdc. Operating temperature shall be -4 to +131 °F (-20 to +55 °C).
A screwdriver adjustable volume control shall be provided on the unit. This volume control shall be externally
accessible, making it possible to adjust volume level of speaker without removal of unit.
The baffle shall be constructed of .5" (1.27 cm) particle board covered with white or black vinyl with matching white
or black cloth grille.
Maximum dimensions of the housing shall be 9.6" (24.38 cm) H x 11.5" (29.21 cm) W x 4.2" (10.67 cm) D.
Approximate weight is 4.5 lbs (2.04 kg).