WALL MOUNTED ONE-WAY SPEAKER MODEL V-1022C
UTILIZES STANDARD CAT 3, 5, OR 6 CABLE
EXCELLENT VOICE AND MUSIC REPRODUCTION
EXTERNALLY ACCESSIBLE VOLUME CONTROL
WIDE SOUND DISPERSION
ELECTRICALLY, ACOUSTICALLY MATCHED PARTS
ATTRACTIVE WALNUT FINISH
DESCRIPTION: Wall surface mounted speaker assembly complete with speaker, amplifier, built-in volume control, sloped baffle and mounting bracket.
Cone Diameter: 8.0" (20.32 cm)
80 Hz to 15 kHz
Impedance: > 600 Ohms nominal
Signal Level: -15 dBm line level
Rating: > 96 dB @ 4' (1.22 m)
Signal/noise ratio: -70 dB
50 mA @ -24 Vdc
Temperature: -4 to +131 °F (-20 to +55°C)
Humidity: 0-95% Non-Condensing
HOUSING AND FINISH
Baffle constructed of .5" (1.27 cm) particle
board, covered with dark walnut vinyl with light
brown open-weave grille cloth.
DIMENSIONS AND WEIGHT
10.60" (27.0 cm) H x 9.75" (24.8 cm) W x 5.20"
(13.2 cm) D
Weight: 5.4 lbs (2.45 kg)
These Valcom Wall Speakers are useful for many different situations. Below you will find some general information about these speakers and below that will be the specific difference between each model.
# Easy Install
# Built In Amplifier
# Built In Volume Control on One-Way Speakers
# Corridor Speakers Produce Bi-Directional
Sound for Long Hallways
Light Brown Open-Weave Grille
ARCHITECTS´ AND ENGINEERS´ SPECIFICATIONS
WALL MOUNTED ONE-WAY SPEAKER
The Wall Speaker, Model V-1022C shall consist of a 45 ohm speaker, amplifier, volume control, and sloped baffle.
The speaker, housing and hardware shall be electrically and acoustically matched for a frequency response of 80 Hz to 15
The speaker element shall be cone type with 5 oz (142 g) ceramic magnet. Diameter of speaker cone shall be 8.0"
(20.32 cm). Voice coil diameter shall be .75" (1.91 cm). Voice coil impedance shall be 45 ohm.
The amplifier shall have a frequency response of 80 Hz to 15 kHz. Distortion shall be less than 1.5% at rated
output of 1 watt RMS. Signal to noise ratio shall be -70 dB. The amplifier shall operate on a -24 Vdc nominal, positive
ground power supply. Operating current shall be 50 mA at -24 Vdc. Operating temperature shall be -4 to +131 °F (-20 to
A screwdriver adjustable volume control shall be provided on the unit. This volume control shall be externally
accessible, making it possible to adjust volume level of speaker without removal of unit.
The baffle shall be constructed of .5" (1.27 cm) particle board covered with dark walnut vinyl with light brown open
weave grille cloth.
Maximum dimensions of the housing shall be 10.60" (27.0 cm) H x 9.75" (24.8 cm) W x 5.20" (13.2 cm) D.
Approximate weight is 5.4 lbs (2.45 kg).