Ceiling flush mount 4" speaker assembly, complete with speaker, amplifier, built-in volume control and round grille.
UTILIZES STANDARD CAT 3, 5, OR 6 CABLE
EXCELLENT VOICE AND MUSIC REPRODUCTION
BUILT-IN ACCESSIBLE VOLUME CONTROL
ELECTRICALLY, ACOUSTICALLY MATCHED COMPONENTS
STURDY STEEL GRILLE
Cone Diameter: 4" (10.16 cm)
Voice Coil Impedance: 45 Ohms
Impedance: > 600 Ohms nominal
Signal Level : -10 dBm line level
Rating: > 93dB @ 4' (1.22 m)
Signal/Noise Ratio: -70
95 Hz to 16 kHz
50 mA @ -24 Vdc
Temperature: -4 º to +131 ºF (-20 to +55 ºC)
Humidity: 0-95% Non-Condensing
HOUSING AND FINISH
Steel grille finished in semi-gloss white enamel.
The backbox is acoustically treated. The metal
backbox and support bridge are finished for rust
prevention and are available separately.
DIMENSIONS AND WEIGHT
7.50" (19.05 cm) Dia. x 3" (7.62 cm) D
Weight: 2.4 lbs (1.08 kg)
V-9904M-5 Support Bridge (order in quantities of 5)
V-9915M-5 Backbox (order in quantities of 5)
The V-9904M-5 and V-9915M-5 must be used
ARCHITECTS´ AND ENGINEERS´ SPECIFICATIONS
MODEL V-1010C AMPLIFIED CEILING SPEAKER
The ceiling flush mounted 4" (10.16 cm) amplified speaker, Model V-1010C, shall include a speaker, amplifier, volume
control and round grille. The speaker assembly, amplifier module, housing and hardware shall be electrically and acoustically
matched for a frequency response of 95 Hz to 16 kHz. The assembly shall be FCC part 68 Registered. The registration number
shall be BAF917-69358-KX-N.
The speaker element shall be cone type with 5 oz (142 g) ceramic magnet. Diameter of speaker cone shall be 4.0"
(10.16 cm). Voice coil impedance shall be 45 ohms.
The amplifier shall have a frequency response of 95 Hz to 16 kHz. Distortion shall be less that 1.5% at rated output of
1 watt RMS. Signal to noise ratio shall be -70 dB. The amplifier shall operate on a -24 Vdc nominal, positive ground power
supply. Operating current shall be 50 mA at -24 Vdc. Operating temperature shall be -4 to +131 ºF (-20 to +55 ºC). Humidity
range shall be 0 - 95%, non-condensing.
A screwdriver adjustable volume control shall be provided at the center of the grille. The externally accessible volume
control shall make it possible to adjust volume level of speaker without removal of unit.
The grille shall be constructed of steel, finished in semi-gloss white enamel.
The V-9915M-5 Backbox and V-9904M-5 Support Bridge shall be constructed of steel and finished for rust prevention.
The backbox shall be acoustically treated. The V-9915M-5 Backbox and V-9904M-5 Support Bridge must be used together.
The maximum dimensions shall be: Speaker and Grille - 7.50" (19.05cm) dia x 3.0" (7.62 cm) D.
Shipping Weight shall be approximately: Speaker and Grille: 2.4 lbs (1.08 kg). Support Bridge (qty 5): 11.5 lbs (5.18
kg). Backbox (qty 5): 7.7 lbs (3.47 kg).
These ceiling mounted paging speakers from Valcom are one way, single input speakers. The big difference is the size of the speaker.
They have a built in amplifier but they will require an external power supply. This can be a Valcom power supply or if you are using a Valcom paging controller, it will supply a certain amount of power.
- Valcom V-1010C 4" 1-way Ceiling Speaker (-1 VPU).
- Built in, screwdriver adjustable, volume control.