70 VOLT EXPANDER MODEL V-1095
BRUSHED STAINLESS STEEL PLATE
WORKS ON 8 OHM AND 25/70/100 VOLT SYSTEMS
COMES WITH SINGLE GANG SURFACE MOUNT BOX
The V-1095 allows expansion of an existing centrally amplified system using Valcom one-way speaker/ amplifier assemblies. The expander works on 8 ohm, 25 Volt, 70 Volt or 100 Volt systems. The expander features
a stainless steel plate with embossed numbers and fits a single gang electrical wall box.
100 V: 20 k Ohm
70 V: 10 k Ohm
25V: 1.25 k Ohm
50 Hz to 20 kHz + 3 dB
HOUSING AND FINISH:
Brushed stainless steel single gang plate
with raised number dial scale, skirted
black knob and position indicator.
The V-1095 can be mounted in wall or on
surface using single gang electrical box.
DIMENSIONS AND WEIGHT:
4.44" (11.28 cm) H x 2.75" (6.99 cm) W x
2.88" (7.32 cm) D
Weight: 0.9 lb (.41 kg)
ARCHITECTS´ AND ENGINEERS´ SPECIFICATIONS
MODEL V-1095 70 VOLT EXPANDER
The 70 Volt Expander, Model V-1095, shall connect to an amplifier output and provide audio output to up to 150
Valcom one-way speaker/amplifier assemblies. It shall be mounted on a brushed stainless steel single gang wall plate.
The plate shall be embossed with a dial scale of "0 through 10." It shall be equipped with a skirted black knob with white
position indicator. It shall work on 8 ohm, 25 volt, 70 volt, or 100 Volt systems.
Input impedance shall be 1.25 k Ohm, 10 k Ohm and 20 k Ohm. Output impedance shall be 8 Ohms. Frequency
response shall be 50 Hz to 20 kHz + 3 dB.
Dimensions shall be 4.44" (11.28 cm) H x 2.75" (6.99 cm) W x 2.88" (7.32 cm) D. Weight shall be approximately
0.9 lb (.41 kg).