2' x 2' LAY-IN CEILING SPEAKER MODEL V-9062
UTILIZES STANDARD CAT 3, 5, OR 6 CABLE
USED WITH TALKBACK PAGE CONTROLS
AESTHETICALLY PLEASING WHITE GRILLE
BAKED ENAMEL FINISH
INTEGRAL PLENUM RATED BACKBOX MEETS OR EXCEEDS A.S.T.M.
E84 FLAME & SMOKE TEST
REPLACES A 2' X 2' OR 1/2 OF A 2' X 4' CEILING TILE
FOUR SEISMIC TABS PROVIDED FOR ADDITIONAL MOUNTING INTEGRITY
DESCRIPTION: 8" speaker assembly mounted in 2' x 2' grille with integral backbox.
Cone Diameter: 8" (20.32 cm)
Voice Coil Impedance: 45 Ohms
Impedance: 45 Ohms nominal
Rated Power: 12 Watts
SPEAKER FREQUENCY RESPONSE
80 Hz to 15 kHz
Temperature: -4 º to +131 ºF (-20 to +55 ºC)
Humidity: 0-95% Non-Condensing
HOUSING AND FINISH
Steel housing with a white baked on acryllic enamel
DIMENSIONS AND WEIGHT
24.0" (60.96 cm) L x 24.0" (60.96 cm) W x 3.75"
(9.53 cm) D
Weight: 5.5 lbs (2.49 kg)
The Valcom LAY IN ceiling speakers are paging speakers / background music speakers that are intended to replace a ceiling tile and lay in the ceiling tile track.
This means you do not have to cut any ceiling tiles for a no mess installation.
Valcom makes these lay in speakers in a variety of flavors.
- Valcom V-9062 2'x 2' Two-Way Ceiling Speaker (0 VPU).
ARCHITECTS´ AND ENGINEERS´ SPECIFICATIONS
MODEL V-9062 2' x 2' LAY-IN TALKBACK CEILING SPEAKER
The V-9062 Lay-in Talkback Ceiling Speaker shall consit of a white two foot by two foot perforated grille, a
speaker and integral backbox. The speaker assembly, housing and hardware shall be electrically and acoustically
matched for a frequency response of 80 Hz to 15 kHz.
The speaker element shall be cone type with 5 oz (141.75 g) ceramic magnet. Diameter of speaker cone shall
be 8.0" (20.32 cm). Voice coil diameter shall be .75" (1.91 cm). Voice coil impedance shall be 45 ohms. Speakers
utilizing an 8 ohm impedance voice coil will not be acceptable.
The baffle shall be constructed with a single piece of perforated steel with a white baked on acrylic enamel
finish. The backbox meets or exceeds A.S.T.M. E84 flame and smoke test and has a three hour burn rating (UL181).
Four seismic tabs provided for additional mounting integrity.
The maximum dimensions shall be 24.0" (60.96 cm) L x 24.0" (60.96 cm) W x 3.75" (9.53 cm) D. Weight shall
be approximately 5.5 lbs (2.49 kg)