45 OHM TALKBACK HORN MODEL V-1048C
USE WITH HANDSFREE TALKBACK CONTROL UNITS
EXCELLENT FOR VOICE AND MUSIC REPRODUCTION
HIGH IMPACT ABS HOUSING
WIDE SOUND DISPERSION
OMNI-DIRECTIONAL MOUNTING BASE
WALL OR ELECTRICAL BOX MOUNT
I-BEAM CLAMP INCLUDED
The V-1048C is a weather resistant reentrant 45 ohm, talkback horn speaker, complete with horn housing, mounting base and I-beam clamp.
275 Hz to 14 kHz
120° Horizontal and 90° Vertical
VOICE COIL IMPEDANCE
SENSITIVITY AS A MICROPHONE
9 mV into 45 ohms at a level of 71.6 dB
Omni-Directional mounting fully adjustable,
360° horizontal and 160° vertical. Detachable base
for wall or electrical box mounting with I-beam
HOUSING AND FINISH
The horn is made of high impact ABS plastic. The
mounting base is constructed of ultra high impact
Temperature: -4 to +131 °F ( -20 to +55 °C)
Humidity: 0-95% Non-Condensing
DIMENSIONS AND WEIGHT
7.38" (18.75 cm) H x 10.0" (25.40 cm) W x 10.4"
(26.42 cm) D
Weight: 4.4 lbs (2.0 kg.)
ARCHITECTS´ AND ENGINEERS´ SPECIFICATIONS
MODEL V-1048C 45 OHM TALKBACK HORN
The 45 Ohm Talkback Horn, Model V-1048C, shall be weather-resistant, high efficiency reentrant type horn with high
frequency diffuser. It shall include a detachable base for wall or single, double or octagon electrical box mounting and omnidirectional
ball joint mounting bracket to allow precise positioning in the vertical and horizontal planes with a single adjustment.
An I-beam mounting clamp shall also be provided.
The frequency response shall be 275 Hz to 14 kHz. Dispersion shall be 120° horizontal and 90° vertical. Voice coil
impedance shall be 45 ohms. Operating temperature shall be -4 to 131 °F (-20 to 55 °C). Operating humidity shall be
The horn shall be constructed of high impact ABS plastic. The mounting base shall be constructed of LEXAN® an ultra
high impact material which is stronger and tougher than die casting. The finish shall be beige with brown accents. The I-beam
mounting clamp shall be constructed of zinc chromate plated steel.
Dimensions of the horn shall be 7.38" (18.75 cm) H x 10.0" (25.40 cm) W x 10.4" (26.42 cm) D. Shipping weight shall
be approximately 4.4lbs (2.0 kg).
LEXAN® Registered Trademark of General Electric Co.
- Valcom V-1048C and V-1048M Talkback Paging Horns.
- 45 ohm.
- For use with Hands-Free Talkback Control Units.
- High Impact ABS Housing.
- Wall or Electrical Box Mount.
- Easy Omni-Lock I-Beam Clamp Mounting System (I-Beam Included).
- Mount Base Before Construction is Done.
- Moveable (360 Degrees Rotation) - Most other horns are moveable up and down.
- Shatter-Proof Base Fits Seven Standard Electrical Gang Boxes.
- Stainless Steel Hardware.
- For Indoor/Outdoor Use.
- Valcom V-1048C (0 VPU), Talkback Paging Horn.(Beige or Gray)
- Valcom V-1048M Marine (0 VPU) Talkback Paging Horn.(White)
- Resist Deteriorating of Salt, Sun and High Humidity.
- Equipped with O-Ring Seals.
Keywords:v-1048C,v-1048c,v1048,v-1048,valcom talkback paging horn