TALKBACK FLEXHORN MODEL V-1090 FEATURES: WEATHER-PROOF ALL STAINLESS STEEL HARDWARE FLEXIBLE MOUNTING: RECESSED & SURFACE MOUNTING BRACKET INCLUDED FACEPLATE AND VANDAL RESISTANT MOUNTING BOX AVAILABLE SEPARATELY DESCRIPTION: The Flexhorn is a talkback horn speaker. The horn is weather proof and can be used indoors or outdoors in environments ranging from -4 to +131 °F (-20 to +55 °C). The flexhorn may be mounted to walls using the supplied universal bracket, mounts to steel "I" beams using the supplied "C" clamp or flush mounted in a wall.
- Valcom Talkback FlexHorn V-1090 (0 VPU).
- Flexhorn aka The Rugged Speaker.
- Talkback Horn Speaker.
- Compact design for areas with low ceilings.
- Low to moderate noise environments.
- Weather Proof for Indoor / Outdoor Use.
- Water-proof for environments requiring direct spray down.
- All Stainless Steel Hardware.
- Four Ways to Mount (Recessed or Surface):
- Adjustable Bracket (V-9804 Included)
- Vandal-Resistant Enclosure (V-9805)
- Vandal Resistant Faceplate (V-9806)
SPEAKER 3.5" (8.9 cm) FREQUENCY RESPONSE 300 Hz - 11 kHz VOICE COIL .75 dia. (1.9 cm), 45 Ohm DISPERSION ANGLE 120° Horizontal 90° Vertical HOUSING AND FINISH Constructed with filled polypropylene Available in White (W), Gray (GY) Beige (BG) Bracket fabricated with 16 AWG CRS and finished with Black weather resistant E coat. All hardware is stainless steel. ENVIRONMENT Temperature: -4 to +131 °F (-20 to +55 °C) Humidity: 0 to 85% Non-Precipitating DIMENSIONS AND WEIGHT 6.8" (17.3 cm) H x 8.3" (21.1 cm) W x 3.3" (8.4 cm) D 2.75 lbs (1.25 kg) ACCESSORY PRODUCTS V-9805 Vandal Resistant Mounting Box and Faceplate V-9806 Faceplate ARCHITECTS’ AND ENGINEERS’ SPECIFICATIONS MODEL V-1090 FLEXHORN™ The paging horn shall be a high efficiency re-entrant type weather-proof horn. It shall be equipped with a universal mounting bracket, volume control and a "I" beam clamp. The frequency response of the horn shall be 300 Hz to 11 kHz The horn shall have a continuous power rating of 3 watts. Dispersion shall be 120 degrees horizontal and 90 degrees vertical. The housing shall be constructed of filled polypropylene and be available in gray, white of beige. All hardware shall be stainless steel. The universal bracket shall be constructed of 16 awg CRS and finished with a weather resistant black ECoat. Dimensions of the horn shall be 6.8" (17.3 cm) H x 8.3" (21.1 cm) W x 3.3" (8.4 cm) D. The weight shall be 2.75 lbs (1.25 kg).