Positive SSL
FAST SHIPPING!    LOW PRICES!    WIDE SELECTION!

0
Empty
Log Into Your Account


BOGEN WB1EZ EASY DESIGN WALL BAFFLE SPEAKER

BOGEN WB1EZ EASY DESIGN WALL BAFFLE SPEAKER
$54.12
Out of stock
SKU: WB1EZ J00867

The Bogen WB1EZ Wall Baffle Speaker is an 8" cone speaker enclosed in a simulated walnut-finished wooden enclosure with a black grille

Show more

Available: Out of stock
The Bogen WB1EZ Wall Baffle Speaker is an 8" cone speaker enclosed in a simulated walnut-finished wooden enclosure with a black grille cloth on front. The WB1EZ is a 1-watt single-tap speaker with recessed volume control designed for use in 70V amplifier systems. Designed for easy wall-mount installation, the WB1EZ comes pre-assembled.
  • Bogen WB1EZ Wall Baffle Speaker.
    o Features screw terminal connections for fast wire lead connection
    o 1W single-tap design
    o Works with 70V amplifier outputs
    o High intelligibility and efficiency
    o Simulated walnut vinyl finish
    o Designed for easy wall-mount installation
    o 8" cone speaker
    o Wooden cabinet
    o Recessed volume control

    Power Rating (RMS): 1-watt, continuous
    Frequency Response: 50 Hz to 12 kHz
    Impedance: 4900 ohms (for use on 70V amplifier outputs)
    Sound Pressure Level: 95 dB at 4 ft. with a 1-watt input on axis
    Dimensions: 9-1/2" W x 9-1/2" H x 5-1/4" D (3-1/4" D @ bottom)
    Shipping Weight: 19 lb.
    Finish: Simulated walnut vinyl

    Architect and Engineer Specifications*
    The surface mounting loudspeaker shall be a Bogen Model WB1EZ, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 50 Hz to 12 kHz.The on axis sound pressure level shall be 95 dB, at least four feet with one-watt input. The loudspeaker shall have a six-ounce ceramic magnet and a 3/4" voice coil. The loudspeaker shall be assembled in a wall baffle for surface-mounting, angled for additional downward sound dispersion. The baffle shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be used to reinforce all side corner joints.The speaker opening shall be covered with a black grille cloth. Overall dimensions shall be 9-1/2" W x 9-1/2" H x 5-1/4" D [top] (3-1/4" D base).
Contact Us
Copyright Ⓒ 2002-22 The Twister Group.