FORTIN EVO-CHRT5 Preloaded Module & T-Harness Combo for Chrysler Dodge Jeep 2007 and newer Standard
reset
SKU: EVO-CHRT5 K11646
Fortin Preloaded Module & T-Harness Combo for Chrysler, Dodge, Jeep, 2007 and newer Standard PRODUCT FEATURES 3 x On-board LEDs for simplified
Show moreAvailable: In stock
Fortin Preloaded Module & T-Harness Combo for Chrysler, Dodge, Jeep, 2007 and newer Standard
PRODUCT FEATURES
3 x On-board LEDs for simplified programming and diagnostics.
1 x Preloaded firmware for maximum compatibility. [1]
1 x Factory Fit T-Harness for easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems. [2]
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
PRODUCT SPECIFICATIONS
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (Passlock, MUX).
PARTS INCLUDED
1 x EVO-ALL control module (firmware preloaded). [3]
1 x Warning label. [3]
1 x 20 Pin general purpose harness. [4]
1 x 4 Pin Fortin 2-way data-link harness. [2]
1 x Factory Fit T-Harness.
PRODUCT FEATURES
3 x On-board LEDs for simplified programming and diagnostics.
1 x Preloaded firmware for maximum compatibility. [1]
1 x Factory Fit T-Harness for easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems. [2]
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
PRODUCT SPECIFICATIONS
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (Passlock, MUX).
PARTS INCLUDED
1 x EVO-ALL control module (firmware preloaded). [3]
1 x Warning label. [3]
1 x 20 Pin general purpose harness. [4]
1 x 4 Pin Fortin 2-way data-link harness. [2]
1 x Factory Fit T-Harness.
Copyright Ⓒ 2002-23 The Twister Group.