FORTIN EVO-FORT3 Remote Start Module & T-Harness Combo for select 2013+ Ford Vehicles
reset
SKU: EVO-FORT3 K11649
The EVO-FORT3 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start interface with T-Harness combo
Show moreAvailable: In stock
The EVO-FORT3 is the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, doorlock, alarm & remote start interface with T-Harness combo module for select 2013+ Ford, Lincoln and Mercury standard key vehicles.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
Product Features:
3 x On-board LEDs for simplified programming and diagnostics.
1 x Preloaded firmware for maximum compatibility.
1 x Factory Fit T-Harness for easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems. [2]
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
Product Specifications:
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (MUX).
Parts included:
1 x EVO-ALL control module (firmware preloaded).
1 x Warning label.
1 x 20 Pin general purpose harness.
1 x 4 Pin Fortin 2-way data-link harness.
1 x Factory Fit T-Harness.
It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
Product Features:
3 x On-board LEDs for simplified programming and diagnostics.
1 x Preloaded firmware for maximum compatibility.
1 x Factory Fit T-Harness for easy install.
1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems. [2]
1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
Product Specifications:
3 x CAN-Bus controllers.
3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
1 x On-board relay (SPDT).
1 x On-board relay (DPDT).
1 x Analog controller 0-12VDC @ 20mV steps (MUX).
Parts included:
1 x EVO-ALL control module (firmware preloaded).
1 x Warning label.
1 x 20 Pin general purpose harness.
1 x 4 Pin Fortin 2-way data-link harness.
1 x Factory Fit T-Harness.
Copyright Ⓒ 2002-22 The Twister Group.