The OMEVOALL the ultimate ALL-IN-ONE data immobilizer bypass, keyless entry, convenience, low power remote start and security interface combo module in the industry.
It raises the standard of hassle-free installation convenience to a whole new level.
It uses a multiple bus architecture with 10 separate communication ports that provide more complete functionality on every supported vehicle.
3x on-board LEDs for simplified programming and diagnostics
1x preloaded firmware for maximum compatibility.
4-wire 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
3x CAN-Bus controllers.
3x General purpose controllers (J1850, Class 2, encrypted key etc.).
1x On-board Relay (SPDT).
1x On-board Relay (DPDT).
1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
1x TB control port for TB-series modules.
1x OMEVOALL control module (firmware preloaded).
1x 44-page Installation and programming guide.
1x 20-pin General purpose harness.
1x 4-pin 2-way data-link harness.
1x 5-pin CAN-Bus harness.
1x 6-pin Relay harness.