MCGARD 24515 Chrome Cone Seat Wheel Locks (M14 x 1.5 Thread Size) - Set of 5
reset
SKU: 24515 F27947
Lug Nut Lock 14 Millimeter X 1.5 Thread Size 60 Degree Conical Acorn 1.6 Inch Overall Length Dual Hex Key Wrench Size 13/16 Inch And 22
Show moreAvailable: In stock
| | |
|||||
Lug Nut Lock
14 Millimeter X 1.5 Thread Size
60 Degree Conical
Acorn
1.6 Inch Overall Length
Dual Hex Key Wrench Size 13/16 Inch And 22 Millimeter
Chrome Plated
Steel
Set Of 5 With Key
Seat Style Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.639; Dual Hex Size 21mm & 22mm; Includes 5 Locks & 1 Key.Material:Alloy Steel.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.
For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
Please note that wheel lock sets are application-specific products. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
14 Millimeter X 1.5 Thread Size
60 Degree Conical
Acorn
1.6 Inch Overall Length
Dual Hex Key Wrench Size 13/16 Inch And 22 Millimeter
Chrome Plated
Steel
Set Of 5 With Key
Seat Style Cone Seat Nut; Thread Size M14 x 1.5; Overall Length 1.639; Dual Hex Size 21mm & 22mm; Includes 5 Locks & 1 Key.Material:Alloy Steel.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.
For use with steel or aluminum wheels with lug nuts that utilize a 60 degree tapered cone seat at the bottom. Kit includes Wheel locks, unique key tool and ID card
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards.
Please note that wheel lock sets are application-specific products. Also note the type of seating your wheel locks require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts
Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If ordering multiple lock sets, the keys will not match. McGard keys will not match OEM locks installed by the factory or dealership.
Copyright Ⓒ 2002-26 The Twister Group.