PAC RP4GM41 Radio Replacement Interface Built In Steering Wheel Control

allows the replacement of a factory radio in select ‘10 – ‘17 General Motors vehicles with 29-bit LAN v2 44-pin connector radios.
All in one radio replacement and SWC interface, the innovative RadioPRO4 comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation.

• Retains steering wheel controls (pre-programmed)
• Data controlled accessory and navigation outputs
• Retains factory amplifier
• Provides factory RSE activation

Compatibility:
Buick Encore, Chevrolet Cruze, Equinox and GMC Terrain:
> Must use firmware version 1.2.3a.4 or higher, Models equipped with navigation are not compatible
> RP does not retain the HVAC backlight in vehicles with a monochrome display.
> The separate LCD screen above the factory radio will not be retained.

2015+ Chevrolet Trax – Must use firmware version 1.2.3a.4 or higher
Chevrolet Malibu – Models with navigation are not compatible