JABSCO 35115-0020 3” FLANGEMOUNT BLOWER 12V 105 CFM
reset
SKU: 35115-0020 R04367
DC 105 CFM Flangemount 3" Blowers Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from
Show moreAvailable: In stock
DC 105 CFM Flangemount 3" Blowers
Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.
Features:
Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.
Features:
- Tough Reinforced Plastic Housing
- Mount to any surface
- Slip-On Inlet and Outlet Ducting Connection
- Efficient High Volume Air Flow
- Low Current Draw
- Corrosion-Resistant Materials Throughout
- N.M.M.A. Type Accepted
- Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
- Complies with ISO 9097 MARINE
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer.
- Ducting: 3"
- Open Flow (CFM): 105
- Volts: 12v
Country of origin: MEXICO*
* Provided by manufacturer, not verified.
Copyright Ⓒ 2002-24 The Twister Group.