VALCOM V-DCPI Digital Clock Protocol Interface for 24V Clocks
Out of stock
SKU: V-DCPI J13228
THE V-DCPI DIGITAL CLOCK PROTOCOL INTERFACE ALLOWS CERTAIN VALCOM INTERCOM SYSTEMS TO PROVIDE TIME CORRECTION DATA TO VALCOM WIRED AND WIRELESS
Show moreAvailable: Out of stock
THE V-DCPI DIGITAL CLOCK PROTOCOL INTERFACE ALLOWS CERTAIN VALCOM INTERCOM SYSTEMS TO PROVIDE TIME CORRECTION DATA TO VALCOM WIRED AND WIRELESS CLOCKS. FOR WIRED CLOCKS THE V-DCPI IS A SIMPLE INTERFACE BETWEEN THE CLOCK CARDS OF THE VALCOM MULTIPATH VC-24 OR V-2924A SYSTEMS AND THE V-VCU 6 AMP 2-WIRE CLOCK DRIVER. THE V-DCPI CONVERTS THE OUTPUT OF THE V-SER VC-2927 OR V-2927 CLOCK CARDS TO A DIGITAL FORMAT SUITABLE FOR CONNECTION TO THE DATA INPUT OF THE V-VCU. THIS INTERFACE ALLOWS THE VALCOM MULTIPATH VC-24 OR V-2924A SYSTEMS TO PROVIDE CLOCK CORRECTION INFORMATION TO VALCOM WIRED CLOCKS CONFIGURED FOR THE VALCOM 2-WIRE CORRECTION PROTOCOL. FOR WIRELESS CLOCKS THE V-DCPI DATA OUTPUT MAY BE USED TO PROVIDE TIME DATA TO A V-WMC WIRELESS MASTER CLOCK OR V-WMCR WIRELESS MASTER CLOCK REPEATER THUS ALLOWING THE VALCOM MULTIPATH VC-24 OR V-2924A SYSTEMS TO PROVIDE CLOCK CORRECTION INFORMATION TO VALCOM WIRELESS CLOCKS.
Copyright Ⓒ 2002-24 The Twister Group.