WELD MOUNT 1001003 EXECUTIVE ADHESIVE & FASTENER KIT WITH AT-8040 ADHESIVE
Out of stock
SKU: 1001003 R18595
Executive Adhesive & Fastener Kit w/AT-8040 Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal
Show moreAvailable: Out of stock
Executive Adhesive & Fastener Kit w/AT-8040 Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber. AT-8040 Will Hold Even Our Heaviest Parts on a Vertical or Overhead Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225°. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.
The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.
The AT-1001003 Kit Contains:
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Contains 1 Tube Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastic Or Rubber. AT-8040 Will Hold Even Our Heaviest Parts on a Vertical or Overhead Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225°. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.
The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.
The AT-1001003 Kit Contains:
- (1) AT-8040 - No Slide Multi Bonder Acrylic Adhesive
- <(1) AT-300 - Dispensing Gun
- (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
- (100) AT-5 - Large White Cable Tie Mount
- (50) AT-3 - Small White Cable Tie Mount
- (4) AT-113 - Large Footman's Strap
- (10) PS62-832-16SS - 1.00" Long Panel Stud
- (4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
- (4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base
- (4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base
- (4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base
- (1) Plano Storage Box 14" x 9" x 2.75"
- Step By Step Instructions
Copyright Ⓒ 2002-24 The Twister Group.